Z-Wave on/off Contact Fixture Module for Home Automation (ZW78S)

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Guangdong

  • Validity to:

    Long-term effective

  • Last update:

    2017-09-20 07:09

  • Browse the number:

    193

Send an inquiries

Company Profile

Nie-Tech Co., Ltd.

By certification [File Integrity]

Contact:Miss Winnie Wen(Mr.)  

Email:

Telephone:

Phone:

Area:Guangdong

Address:Guangdong

Website: http://nie-tech.hzxymbj.com/

Product details

ZW78S ON/OFF Contact Fixture Module


Introduction
 
This module is designed to operate in a wall switch box or in locations where the control of an electric device is needed. It is also possible to send a signal to any system that is to be integrated with Z-wave system.
 
Technical data
 
Operating Voltage 120VAC/50HZ
Operation Temperature 0 ~ 40ºC
Maximum Load 16A (3000W)
Electricity consumption <0&period;8W
Range 30m line of sight
Switch 1&ast;DC switch &lpar;local&rpar;&comma; 2&ast;DC switch &lpar;group&rpar;
Dimensions&lpar;L&ast;W&ast;H&rpar; 60&ast;44&ast;18mm
Frequency 908&period;42MHz


 
Installation
 
1&period; Before installation ensure that the voltage supply is disconnected&period;
2&period; Connect ZW78 module as shown on above diagram&period;
3&period; Place the Module in the switch box&period;
4&period; Arrange the antenna &lpar;tips are presented as above diagrams&rpar;
Do not cut or shorten the antenna - its length is perfectly matched to the band in which the system operates&semi; Locate the antenna as far from metal elements as possible &lpar;connecting wires&comma; bracket rings&comma; etc&period;&rpar; in order to prevent interferences&period;
5&period; Connect the device in accordance with the wiring diagram presented in Wiring diagram&period; Switch on 120V of the mains voltage&period;
6&period; For "Add" in a network&colon; Put the Z-wave interface controller into "Add" mode&comma; and following its instruction to add the ZW78 to your controller&period; To get in the "Add" mode&comma; the distance between ZW78 module and controller is suggested to be in one meter&period; Quickly pressing the learn switch of ZW78 for 1 second at least & release to be included&period;
7&period; For "Remove" from a network&colon; set up the Z-wave interface controller into "Remove" mode&comma; and following its instruction to delete the ZW78 from your controller&period; Press the learn switch of ZW78 for 1 second at least &release to be excluded&period;
8&period; For "Condition" which is controlling other devices of Z-wave system&comma; Condition ensures direct transfer of control commands between devices&comma; and is performed without participation of the main controller&period; e&period;g&period; Dimmer&comma; Switch &lpar;ON-OFF&rpar;&comma; Door&sol;Window sensor&comma; PIR&comma; Shutter or scene &lpar;scene may be controlled only through the ZE300 gateway&rpar;&period;



Safety and maintenance instruction

- Make sure that all electric connections and connection cables meet the pertaining regulations and are in conformity with the operating instruction&period;
- Do not overload electrical outlets or extension cords&comma; fire or electric shocks can be the result&period;
- Please contact an expert in case you have any doubts about the mode of operation&comma; the safety or connecting the appliances&period;
- Keep all parts away from young children's reach&period;
- Do not store this item on wet&comma; very cold or warm places&comma; this can damage the electronic circuit boards&period;
- Avoid dropping or shocks&comma; this can damage the electronic boards&period;
- Never replace damaged power cables yourself&excl; In such case&comma; remove them from the net and take the devices to a workshop&period;
- Wireless system are subject to interference from cordless phones&comma; microwaves&comma; and other wireless devices during installation and operation&period;

 
Maintenance

The devices are maintenance-free&comma; so never open them&period; The guarantee becomes void when you open the appliance&period; Only clean the outside of the devices with a soft&comma; dry cloth or a brush&period; Prior to cleaning&comma; remove the devices from all voltage sources&period;

Payment&Shipping 

About us&excl;

NOTE&excl;

Do not use any carboxylic cleaning agents or petrol&comma; alcohol or similar&period; These will attack the surface of devices&period; Besides&comma; the vapors are hazardous to your health and explosive&period; Do not use any sharp edged tools&comma; screw drivers&comma; metal brushes or similar for cleaning&period;
 
Warranty 1 year