High-risk security situations do not leave any margin for error thus requiring intricate security procedures designed to ensure safety and piece of mind. The TM-915 has been created specifically with this in mind. TM-915 mainly used in detecting the close state of door and window, when the door or window opened as unknown reason and the detector will send out specific radio wave to alarm host to achieve remote alarm.
Specification
Model Name |
TM-915(Door Sensor Detector ) |
Working Voltage |
3V(two 1. 5V AAA battery ) |
Alarm Current |
≤70mA |
Standby Current |
≤10uA |
RF Distance |
<=30M (open area); |
Alarm Format |
Remote alarm (connect alarm host through RF) |
Radio Frequency |
915MHz/FSK |
Measurement |
91*44*18. 3 mm |
Features:
Super low power consumption
Wireless communication with Alarm Host
Anti high-frequency interference
Rolling code for anti-crack
Low voltage alert
Direction for Use
1. The wireless door sensor detector is designed with power saving function. It
doesn't send out wireless signal when door is closed. When the door is opened, the
detector will send out wireless alarm signal for about 1 second, and the LED will flash
1 time till self-stop.
1. Choose an appropriate location to install the door sensor detector bracket and
magnet. The magnetic reed and magnet should be respectively installed in the inner
door frame and door. In the upper edge and upper frame of the door, load the battery
and insert the main body of door sensor detector into the bracket. Keep the magnetic
reed and magnet paralleled within 3cm.
2. After load the battery, the detector goes into working status (the LED will flash).
When the gap between gate magnetic reed and magnet is over 3cm(the door is
opened), the red LED is on, and the detector will send alarm signal to alarm host.
2. No matter the door is opened or closed, the detector will send current door status
to alarm host every 15 minutes. If the alarm host is under arming, it will remind user
to close the door in time if the door is opened.
3. The door sensor detector has low voltage detection function. It will send out alarm
signal when under low voltage.
4. This door sensor detector can be used as alarm host accessory. All the status can
be seen through cellphone APP.